Do you want to build your own drone kit after you have a fishing drone? Today, we will introduce the relevant parts of drones. Understanding the knowledge of drone parts will not only enrich your confidence in drone flight, but also will help you to build a drone kit.
The parts for building a drone fishing kit are as follows: the propeller, the brushless motor, the landing gear, the rack, the motherboard of a drone, the GPS module.
Generally speaking, the propeller is installed above the drone in most cases. The propeller pushes down the air and generates lift force through the characteristics of reaction force. Although there is few differences when observing the propellers from the top and the bottom, they still have the obverse and the reverse. The oars and wings are mostly made of ultralight carbon fiber, so the overall fuselage is lighter.
At present, almost all new drones in the market have used the external rotating brushless motors, because they are safer, more efficient and with lower noise than brush motors. The design of the motor is equally important, because motors with higher efficiency can save the battery life and increase the flight time of drones, which are expects of every user. Ideafly Poseidon products with quality batteries can easily meet the needs of users.
Tips: Users should check the motor regularly to ensure that the motor is clean and complete. Most of the noise of the drones comes from the motor. If you feel that the motor produces abnormal sound during the use, you should check whether there is a problem with the motor. Therefore, it is better to prepare several spare motors before flying.
It is necessary to install a landing gear if the Poseidon 480 fishing drone needs to take off and land on irregular ground or in complex environment.
The rack is the main part of a drone. The shell is made of corrosion-resistant special plastic material. In addition to the lightness and and flexibility, the shell is also processed with nano waterproof treatment, which can protect the internal wiring and electronic parts from the corrosion of sea water and salt sand, so as to prolong the service life. Generally speaking, large racks can increase the maneuverability of drones, while the drones with small racks are more stable.
This is the central hub of a drone, which contains batteries, flight control, electronic speed controller, camera, receiver, etc.
GPS modules are usually combined by receivers and magnetometers to provide latitude, longitude, altitude and heading. GPS is an important condition for navigation and autonomous flight. The application scope of drones is very narrow without GPS.