1. 308 Charger
This drone charger supports many types of batteries. Each channel supports 8 strings of LiPo, Lilo, LiFe and NiZn, with a maximum balance current of 1.2A, and supports 1-20 strings of Ni-MH and Ni-Cd batteries for charging; At the same time, it supports charging of 1-15 lead-acid batteries. The maximum charging power is 1300W, the maximum channel charge and discharge current is 30A, and the maximum charge and discharge current of the two-channel synchronous mode is 50A. No matter what kind of drone model you are playing, this charger can be called a universal charger. In addition, its function is also very powerful, it has discharge function, internal heat preservation function, internal resistance test function and so on.
2. 4010 Charger
The maximum charging power of this drone charger is 2000W, and the maximum channel charging and discharging current is 40A. The maximum charge and discharge current of the two-channel synchronous mode is 70A, and the channel supports 10s LiPo, Lilo, and LiFe. The maximum balance current of 1.2A is larger than 308 power and charging current. However, it depends on the most suitable charging current for lithium batteries. Because if the current is too large, the impact on the battery itself is not very good.
3. A6 Charger
The new drone charger can charge 2 6S/5S/4S or 4 groups of 3S or 6 groups of 2S at the same time. The current can be set, and the charging current setting range is 0.2A~8A. Of course, it can also be discharged, the balance discharge current is 0.1A~2.5A, and the maximum output power is 200W. The current is very small, so it is suitable for aerial photography and aerial survey aircraft.
4. pl6, pl8 Charger
The difference between the drone charger PL8 and PL6 is that 8 supports up to 8S, and 6 supports up to 6S charging, both of which are 40A charging. At the same time, both of them have the functions of energy saving, environmental protection, and voltage measurement.
5. Portable charger
It can be charged directly with 220V power supply, and the charging current is 20A. The charger also has a discharge function. When the battery is to be stored, the charger can charge or put the battery in the best storage state. Currently, it only supports the charge and discharge of 6S batteries, which can charge two groups at a time.