Contact Us

Analysis of Several Common UAV Chargers

UAVs continue to evolve, with more and more functions, and they are slowly entering the lives of ordinary people. At present, UAVs are widely used in plant protection operations, aerial photography, aerial surveys, line inspections, firefighting, etc. Among them, the key parts that support its flight are batteries and power supply systems. Today, Shenzhen ldea-fly Technology focuses on the power supply of drones. We will analyze several commonly used drone chargers, such as 308, 4010, pl6, etc., so that everyone can find a suitable drone charger when choosing.


308 charger

There are many types of supported batteries. Each channel supports 8 strings of LiPo, Lilo, LiFe and NiZn, with a maximum balance current of 1.2A, supporting 1-20 strings of Ni-MH and Ni-Cd batteries; supporting 1-15 strings of lead-acid batteries. The maximum charging power is 1300W, the maximum channel charging and discharging current is 30A, and the maximum charging and discharging current of the two-channel synchronous mode is 50A. This charger can be called a universal charger regardless of the type of airplane model. In addition, its functions are also very powerful, with discharge function, internal heat preservation function, internal resistance test function, etc.


4010 charger

The maximum charging power of charger for a drone is 2000W, the maximum charging and discharging current of the channel is 40A, and the maximum charging and discharging current of the two-channel synchronous mode is 70A. The channel supports 10s LiPo, Lilo, LiFe, and the maximum 1.2A balance current is relatively large compared to 308 power and charging current. But for lithium batteries, it depends on the most suitable charging current. Too much current will not have a good impact on the battery. Its other functions are basically the same as 308.


A6 charger

The new type can charge two 6S/5S/4S or 4 groups of 3S or 6 groups of 2S at the same time. The current can be set, with setting range of 0.2A~8A. Of course, it can also be discharged. The balanced discharge current is 0.1A~2.5A. The maximum output power is 200W. The current is very small, suitable for aerial photography and aerial survey aircraft, but the charging current for plant protection is too small to be practical.


pl6, pl8 charger

The difference between PL8 and PL6 is that 8 supports up to 8S, and 6 supports up to 6S charging, both of which are 40A charging. It has the functions of energy saving, environmental protection, voltage measurement, support and board charging.

Analysis of Several Common UAV Chargers
Welcome to the IDFTECH.com
All our prices are in USD.
Our prices exclude all local taxes and duties.
We ship world wide.
Contact Us ifly@idea-fly.com
0755-23110006
Room 201, No.13, Anhuai road, Hualian Community, Longhua street, Longhua District, Shenzhen
Room 201, No.13, Anhuai road, Hualian Community, Longhua street, Longhua District, Shenzhen
ifly@idea-fly.com
0755-23110006